abseil (20240722.0-1.5) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Skip absl_failure_signal_handler_test on ppc64 too.
abseil (20240722.0-1.4) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Upload to unstable.
abseil (20240722.0-1.3) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Correct a mistake in the skip in -1.2.
abseil (20240722.0-1.2) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Skip absl_failure_signal_handler_test on ppc64el, it's known to fail.
abseil (20240722.0-1.1) experimental; urgency=medium
 .
   * Non-maintainer upload.
   * Bump cmake_minimum_required in the cmake autopkgtest to 3.5...3.31.
     (Closes: #1087850)
abseil (20240722.0-1) experimental; urgency=medium
 .
   * New upstream release.
abseil (20240116.2-2) experimental; urgency=medium
 .
   * Backport an upstream patch to enable demangling on mips64el.
abseil (20240116.2-1) experimental; urgency=medium
 .
   * New upstream release.
abseil (20230802.1-4.2) unstable; urgency=medium
 .
   * Non-Maintainer upload.
   * Patch: Add missing include for <iomanip>. (Closes: #1077527)
abseil (20230802.1-4.1) unstable; urgency=medium
 .
   * Non-Maintainer upload.
   * Bump cmake_minimum_required in the cmake autopkgtest to 3.5...3.31.
     (Closes: #1087850)

artikulate (4:24.12.3-1) unstable; urgency=medium
 .
   * New upstream release
   * Team upload

belle-sip (5.3.105+dfsg-3) unstable; urgency=medium
 .
   * Team upload.
   * Remove unneeded Breaks and Replaces from libbellesip3 against libbellesip2.
   * List explicit pathnames in debhelper fragment files.
   * Fix the belle-sip.pc pkg-config file to refer to the correct .so filename.
   * Add a backwards compatibility symlink matching old unversioned SONAME.
   * Update copyright years.

blupimania (1.6.3-2) unstable; urgency=medium
 .
   * Team Upload
   * Add d/gbp.conf
 .
   [ Patrice Duroux ]
   * d/patches: add CMakeLists_txt.patch (Closes: #1096237)

bouncy (0.6.20071104-10) unstable; urgency=medium
 .
   [ Alexandre Detiste ]
   * Update Miriam email address
   * Bump Standards-Version to 4.7.2
 .
   [ Patrice Duroux ]
   * d/watch: update.

cardpeek (0.8.4-3) unstable; urgency=medium
 .
   * Team upload
   * Build with lua 5.3 again (Closes: #1050543)
   * Include patches for lua scripts that break with lua 5.3, see #1063333

caveexpress (2.5.2-4) unstable; urgency=medium
 .
   * Team Upload
   * reformat d/control with debputy
 .
   [ Patrice Duroux ]
   * d/patches: use SDL_mixer.h in the right place (Closes: #1095714)
   * d/salsa-ci.yml: added to use Salsa CI.
   * d/rules: force LC_ALL to satisfy reprotest.
   * d/salsaci.yml: activate diffoscope for reprotest
   * d/salsa-ci.yml: update (noeol).

cl-drakma (2.0.10-2) unstable; urgency=medium
 .
   * Disable autopkgtest as they now depend on the missing easy-routes package

cl-usocket (0.8.8-3) unstable; urgency=medium
 .
   * Remove autopkgtest as they cannot reliably work without network
     connections, which is not always present on test systems.
     (Closes: 970345, 1093589, 1094860)
cl-usocket (0.8.8-2) unstable; urgency=medium
 .
   * Applied fixes to the testsuites
   * Import upstream fix for SBCL related bug
cl-usocket (0.8.8-1) unstable; urgency=medium
 .
   * New upstream version 0.8.8
   * Refreshed patches
   * Updated Standards-Version, no changes

cross-toolchain-base-ports (70+nmu1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Build using linux 6.12.17.
   * Build using gcc 14.2.0-17.
   * Build using glibc 2.41-4.
   * Build using binutils 2.44-3.
   * Refresh glibc patches. Closes: #1092397.

dbus (1.16.2-2) unstable; urgency=medium
 .
   * Pass fewer options to adduser (Closes: #1099086)
     - Remove --no-create-home. Add a versioned dependency on 3.130
       instead, so that /nonexistent will be special-cased to not be created.
     - Remove --home /nonexistent.
       This is the default for system users since 3.122.
     - Remove --disabled-password.
       This is the default since at least 3.118 (Debian 11).
   * d/p/debian/sysusers.d-Set-user-s-home-directory-to-nonexistent.patch:
     Add patch so sysusers.d sets home directory /nonexistent, making it
     consistent with what adduser would do
   * d/dbus-system-bus-common.postinst: Create system user in more
     situations, matching the behaviour of dh_installsysusers
   * d/dbus-system-bus-common.postinst: Use systemd-sysusers if available.
     This avoids needing an unconditional dependency on adduser.
   * d/control: Remove alternative dependency on usr-is-merged.
     Now that a version of base-files that enforces merged /usr has been
     in testing for a while, we can drop the alternative dependency, which
     should help apt to realise that usr-is-merged can be autoremoved.
     The versioned dependency on base-files is intentional (see #1054650,
     #1072756, #1085407) and should be kept until the beginning of the
     forky cycle. During upgrades from bookworm to trixie, if a system has
     been misconfigured to force non-merged /usr (contrary to #978636,
     #994388), then we want that misconfiguration to be detected by
     base-files.preinst and stop the upgrade early, without first
     installing a version of dbus that will not work on that system.
     (Closes: #1099706)
   * Standards-Version: 4.7.2 (no changes required)

dbus-fast (2.39.3-1) unstable; urgency=medium
 .
   * New upstream release.
   * Cython now works on big endian architectures, enable it everywhere.
   * Update Standards-Version.
   * Move files to clean from override_dh_auto_clean to debian/clean.

dh-python (6.20250308) unstable; urgency=medium
 .
   * Exclude Pyside6 from cpython3_fallback, maintainers need to explicitly
     depend on the modules they require.
dh-python (6.20250306) unstable; urgency=medium
 .
   * Update pydist data.
   * Drop the python3-setuptools dependency.
dh-python (6.20250108+exp1) experimental; urgency=medium
 .
   * Upload to experimental.
     - Without the python3-setuptools dependency.

elkcode (10.4.5-1) unstable; urgency=medium
 .
   * New upstream release.
   * debian/patches/ls_locale_for_reproducible_order.patch: Refreshed.
   * debian/patches/makefile_clean.patch: Likewise.
   * debian/patches/relax_test_thresholds.patch: New patch, relaxing a test
     threshold.

factory-boy (3.3.3-1) unstable; urgency=medium
 .
   * Team upload
   * [97bd65c] New upstream version 3.3.3
   * [a0ea9d2] d/control: Bump Standards-Version to 4.7.2
   * [8e7c1f4] d/copyright: Update  year data

fivem-api (0.1.2-2) unstable; urgency=medium
 .
   * Update Standards-Version.
fivem-api (0.1.2-1) unstable; urgency=medium
 .
   * Initial release. (Closes: #1076937)

gallery-dl (1.29.1-1) unstable; urgency=medium
 .
   * New upstream version 1.29.1.
   * Update Standards-Version to 4.7.2.

gcl (2.6.14-18) unstable; urgency=medium
 .
   * Version_2_6_15pre17
gcl (2.6.14-17) unstable; urgency=medium
 .
   * Version_2_6_15pre16
   * Bug fix: "ftbfs with GCC-15", thanks to Matthias Klose (Closes:
     #1096684).
   * Bug fix: "outdated debconf version constraint; inhibits support for
     debconf-2.0/cdebconf", thanks to Gioele Barabucci (Closes: #1096165).

glibmm2.68 (2.84.0-1) unstable; urgency=medium
 .
   * New upstream release
   * Bump minimum glib

gnustep-dl2 (0.12.0+git20250112-2) unstable; urgency=medium
 .
   * debian/control (Build-Depends): Replace librenaissance0-dev with
     librenaissance-dev so that the former can be dropped in forky.
     (Standards-Version): Claim compliance with 4.7.2; no changes needed.
     (libgnustep-dl2-dev) <Conflicts>: Add libsope-dev.

golang-connectrpc-connect (1.14.0-1) unstable; urgency=medium
 .
   * New upstream version 1.14.0
   * Update my maintenance email
   * Only run unit tests using -short (Closes: #1099186)
   * Bump Standards-Version to 4.7.2 (no changes)

golang-github-apptainer-container-key-client (0.8.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Adopt package. Thanks, Andreas!

gsmartcontrol (2.0.2-1) unstable; urgency=medium
 .
   * New upstream release.
   * Standards-Version 4.7.2, no change required.

gst-plugins-base1.0 (1.25.90-2) unstable; urgency=medium
 .
   * upload to unstable
gst-plugins-base1.0 (1.25.90-1) experimental; urgency=medium
 .
   * New upstream version 1.25.90
   * d/control: update dependency version to 1.25.90
   * d/symbols: update with new h265 codec utils
   * d/control: update with EGL symbol
gst-plugins-base1.0 (1.25.50-1) experimental; urgency=medium
 .
   * New upstream version 1.25.50
gst-plugins-base1.0 (1.25.1-5) experimental; urgency=medium
 .
   * Revert "d/patches: disable some GL/Mesa tests for ppc64el failures"
   * d/symbols: remove gst_egl_image_can_emulate for hurd
gst-plugins-base1.0 (1.25.1-4) experimental; urgency=medium
 .
   * d/patches: test for latomic
gst-plugins-base1.0 (1.25.1-3) experimental; urgency=medium
 .
   * d/patches: disable some GL/Mesa tests for ppc64el failures
gst-plugins-base1.0 (1.25.1-2) experimental; urgency=medium
 .
   * d/control: hurd-any dependency fixes (Closes: #1093411)
   * d/control: bump GStreamer version dependency
gst-plugins-base1.0 (1.25.1-1) experimental; urgency=medium
 .
   * d/gbp.conf: adjust for experimental
   * New upstream version 1.25.1
   * d/patches: remove video-Move-Y410-into-the-correct-place-for-big-endian-pla.patch
   * d/symbols: add 1.25.1 new symbols

gst-plugins-ugly1.0 (1.25.90-2) unstable; urgency=medium
 .
   * Upload to unstable
gst-plugins-ugly1.0 (1.25.90-1) experimental; urgency=medium
 .
   * New upstream version 1.25.90
   * d/control: update dependency version to 1.25.90
gst-plugins-ugly1.0 (1.25.50-2) experimental; urgency=medium
 .
   * d/control: remove Build-Dep on good plugins
   * d/control: update 1.25.1 dependencies to 1.25.50
gst-plugins-ugly1.0 (1.25.50-1) experimental; urgency=medium
 .
   * New upstream version 1.25.50
gst-plugins-ugly1.0 (1.25.1-1) experimental; urgency=medium
 .
   * d/gbp.conf: adjust for experimental
   * New upstream version 1.25.1
   * d/control: bump GStreamer version dependency

gstreamer1.0 (1.25.90-2) unstable; urgency=medium
 .
   * Upload to unstable
gstreamer1.0 (1.25.90-1) experimental; urgency=medium
 .
   * New upstream version 1.25.90
gstreamer1.0 (1.25.50-1) experimental; urgency=medium
 .
   * New upstream version 1.25.50
   * d/symbols: add new
gstreamer1.0 (1.25.1-4) experimental; urgency=medium
 .
   * Revert "d/patches: revert C11 atomics"
   * d/patches: test for latomic
gstreamer1.0 (1.25.1-3) experimental; urgency=medium
 .
   * d/rules: disable libunwind (Closes: #1093376)
gstreamer1.0 (1.25.1-2) experimental; urgency=medium
 .
   * d/patches: revert C11 atomics
gstreamer1.0 (1.25.1-1) experimental; urgency=medium
 .
   * d/gbp.conf: adjust for experimental
   * New upstream version 1.25.1
   * d/libgstreamer1.0-dev.install:  install FindGStreamer.cmake
   * d/symbols: add 1.25.1 symbols

h2orestart (0.7.2-1) unstable; urgency=medium
 .
   * New upstream version

hpsockd (0.17+x-0.1) unstable; urgency=medium
 .
   * QA upload.
     Closes: #1093570, #1085583, #1085583
 .
   [ Andreas Tille ]
   * Maintain package in Debian/ team on Salsa
   * This package is not Debian native - separate source and packaging
   * Fix build with GCC-14 (Closes: #1075070)
   * This is no sample rules
   * Short dh
   * Standards-Version: 4.7.2 (routine-update)
   * debhelper-compat 13 (routine-update)
   * Remove trailing whitespace in debian/copyright (routine-update)
   * d/copyright: DEP5 + review
   * Do not explicitly start/stop daemon in postinst, prerm since this is
     auto-injected
 .
   [ наб ]
   * d/rules: dh_installmanpages-is-obsolete
   * d/rules: dh-clean-k-is-deprecated
 .
   [ Barry deFreese ]
   * Fix FTBFS on Debian GNU/Hurd
     Closes: #533731

hyperkitty (1.3.12-2) unstable; urgency=medium
 .
   * Add upstream patch to fix tests after Python 3.13 argparse changes
     (closes: #1088312).
   * Bump Standards-Version to 4.7.2.
   * Add myself to Uploaders.
hyperkitty (1.3.12-1) unstable; urgency=medium
 .
   * New upstream release 1.3.12
     - Fix missing Build-Dependency on dateutil
     - Closes: #1073392
   * d/watch: rollback to pypi as gitlab seems to be a dead end.
   * Bump Standards-Version to 4.7.0
hyperkitty (1.3.9-1) unstable; urgency=medium
 .
   * New upstream release 1.3.9
     - Update (Build-)Dependencies (Closes: #1052805)
   * d/control:
     - Drop python3-mock from Build-Dependencies (Closes: #1067044)
   * d/watch: Update url tracking
   * Drop d/upstream directory
   * Fix embedded js/css libs changes
hyperkitty (1.3.7-1) unstable; urgency=medium
 .
   * New upstream release 1.3.7
   * d/control:
     - Bump Standards-Version to 4.6.2
     - Depend on fonts-font-awesome to remove some embedded fonts
       (Closes: #1028021)
   * d/s/lintian-overrides: cleanup
   * Link jquery stuff to the libjs-jquery version
hyperkitty (1.3.6-1) unstable; urgency=medium
 .
   * New upstream release 1.3.6 (Closes: #1013480, #999910)
     - Dropped patches 0004 and 0005
   * d/copyright: updated
   * d/control:
     - Bump debhelper-compat level to 13
     - Bump Standards-Version to 4.6.1
     - Update version dependencies and remove the unneeded ones
   * Updated lintian overrides
   * debian/tests: use py3versions -s
hyperkitty (1.3.5.0-2) unstable; urgency=medium
 .
   * Releasing 1.3.5-2 in unstable with a version fix because of my previous
     version screwup.
hyperkitty (1.3.5-1+really1.3.4-1) unstable; urgency=medium
 .
   * Rollback as mistune is reverting to 0.8.4. Will come again in unstable in
     a couple months when mistune goes again to 2.0.0
   * Disable testing at buildtime as we know it'll predictably fail (that was
     the purpose of going to 1.3.5)
hyperkitty (1.3.5-1) unstable; urgency=medium
 .
   * New upstream release 1.3.5 (Closes: #995653)
   * d/p/0004: Add a patch to fix failing mistune imports due to hyperkitty
     initially being released depending on mistune 2.0.0rc1.
   * d/p/0005: Ensure that date headers are valid
     This makes HyperKitty consistently build against py3.10
   * d/missing-sources/jquery-1.10.1.js dropped
   * d/copyright: updated
   * d/control: Bump Standards-Version to 4.6.0
hyperkitty (1.3.4-4) unstable; urgency=high
 .
   * d/p/0005_ensure_private_archives_during_import.patch: Ensure private
     archives stay private during import (CVE-2021-33038). (Closes: #989183)
hyperkitty (1.3.4-3) unstable; urgency=high
 .
   * d/p/0004_remove_link_to_google_fonts.patch: Don't load remote Google
     fonts. Thanks to Kunal Mehta for bugreport and testing. (Closes: #987654)
hyperkitty (1.3.4-2) unstable; urgency=medium
 .
   * Replace bootstrap3 usage with bootstrap4.
   * Compile the LC_MESSAGES at build time
hyperkitty (1.3.4-1) unstable; urgency=medium
 .
   * New upstream release
   * d/control: Update (build-)dependencies
   * d/patches: Rebased
hyperkitty (1.3.3-1) unstable; urgency=medium
 .
   * New upstream release
   * d/control:
     - Update (build-)dependencies
     - Bump standards-version to 4.5.1
   * d/tests/control: Update test dependencies
   * d/rules: Replace all glyphicons-halflings-regular font files with symlinks
     to the files from package fonts-glyphicons-halflings
   * d/copyright: fix order of globbing patterns
hyperkitty (1.3.2-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload
   * Use glyphicons-halflings from fonts-glyphicons-halflings (Closes: #962880)
hyperkitty (1.3.2-1) unstable; urgency=medium
 .
   * New upstream release 1.3.2
     - d/p/MR201.patch removed
   * d/control:
     - Bump Standards-Version to 4.5.0
   * d/tests/:
     - Setup a specific test engine
hyperkitty (1.3.0-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * debian/patches/MR201.patch
     - make hyperkitty compatible with networkx 2.4; Closes: #945392
hyperkitty (1.3.0-1) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/patches/0002_Use_python3_by_default.patch:
     - Use python3 by default instead of /usr/bin/env python. Thanks to
       Louis-Philippe Véronneau for bugreport and patch. (Closes: #924410)
   * d/patches/0003-run-sassc-at-build-time.patch:
     - Compress sassc files using sassc at build time (Related to #924961)
   * d/control:
     - Add breaks for mailman3-web (<< 0+20180916-10~) to ensure that
       'django-admin collectstatic' is run after this update.
 .
   [ Pierre-Elliott Bécue ]
   * New upstream release 1.3.0
   * d/control:
     - Bump Standards-Version to 4.4.1
     - Switch to debhelper-compat
     - Add sphinxdoc:Depends to python3-django-hyperkitty
     - Set Rules-Requires-Root to no
   * d/missing-sources:
     - Add mousetrap.js
   * d/copyright:
     - Add mousetrap.js
hyperkitty (1.2.2-1) unstable; urgency=medium
 .
   * New upstream release 1.2.2
   * d/control:
     - Remove obsolete dependency on python3-django-paintstore.
     - Add breaks for mailman3-suite (>> 0+20180916-5~) to reflect the
       removed dependency on paintstore.
     - Bump standards-version to 4.3.0, no changes required.
   * d/p/0001_README_remove_embedded_images.patch:
     - Remove embedded images from README.rst
hyperkitty (1.2.1-4) unstable; urgency=medium
 .
   * d/control:
     - Replace my Crans address by my Debian address in uploaders
   * d/rules:
     - Make the tests more verbose. Initially it was to debug garbage output,
       but I prefer this output. It's more relevant.
   * d/links:
     - Fix the broken link to the rst sources due to the python3 migration.
       (Closes: #910411)
hyperkitty (1.2.1-3) unstable; urgency=medium
 .
   * d/tests/control: Add python3-all to dependencies. (Closes: #909587)
hyperkitty (1.2.1-2) unstable; urgency=medium
 .
   * d/tests/control:
     - Run testsuite with python3
hyperkitty (1.2.1-1) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue ]
   * New upstream release 1.2.0
     - python3 now fully supported
     - d/p/0001 becomes obsolete, removed.
     - Rename d/p/0002 to d/p/0001
     - upstream signing key changed. Using now
       541EA0448453394FF77A0ECC9D9B2BA061D0A67C (Abhilash Raj)
   * d/control:
     - Update (Build-)?Depedencies, as Python3 is the only supported version
       now
 .
   [ Jonas Meurer ]
   * New upstream release 1.2.1
   * d/control:
     - Bump standards-version to 4.2.1, no changes required
     - Add versioned (Build-)Depends on python3-django >= 1:1.11
     - Add versioned (Build-)Depends on python3-mailmanclient >= 3.2.0
     - Add versioned (Build-)Depends on python3-django-haystack >= 2.8.0
     - Add Conflicts/Replaces python-django-hyperkitty
   * d/rules:
     - Migrate build system to python3
   * d/source/lintian-overrides:
     - Remove obsolete python2 lintian overrides
   * d/patches/0001-django-q-API-changed-Async-class-became-AsyncTask.patch:
     - Remove obsolete patch, got incorporated upstream
   * d/python3-django-hyperkitty.lintian-overrides:
     - Add lintian-overrides for jquery and fontawesome. In both cases, we
       have to keep the shipped versions due to backwards-incompatible changes.
hyperkitty (1.1.4-8) unstable; urgency=medium
 .
   * d/control:
     - Add the Depends field on python-django-hyperkitty on python-django-q >=
       0.9.4-2 (Closes: #905557)
hyperkitty (1.1.4-7) unstable; urgency=medium
 .
   * d/patches:
     - Take into account django-q API changes.
   * d/control:
     - Bump Standards-Version to 4.2.0. No change required
hyperkitty (1.1.4-6) unstable; urgency=medium
 .
   * d/rules:
     - Comment out the font-awesome replacement calls as fonts-glewlwyd relies
       on fonts-font-awesome's shipped ones, and font-awesome 5 is not
       providing them anymore. Use upstream's shipped fonts.
hyperkitty (1.1.4-5) unstable; urgency=medium
 .
   * d/rules:
     - Prevent dh_clean to delete
       hyperkitty/tests/testdata/payload-utf8-wrong.txt.orig
     - Use the font-awesome.ttf and the FontAwesome.otf files from
       fonts-glewlwyd package as fonts-font-awesome got updated and is not
       backward compatible. Expect breakage as soon as upstream migrates to
       font-awesome 5.
       Closes: #898920
   * d/control:
     - Lowers build-depends on dh >= 11 to dh >= 11~
     - Remove the dependency on fonts-font-awesome.
     - Bump Standards-Version to 4.1.4
   * d/python-django-hyperkitty.examples:
     - Add the files in example_project in /u/s/d/p-d-h/examples
hyperkitty (1.1.4-4) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/control:
     - Don't recommend mailman3, recommend mailman3-web instead.
 .
   [ Pierre-Elliott Bécue ]
   * d/rules:
     - Remove the embedded fonts that are in other packages. Same for
       bootstrap.js{,.min}
     - Add upstream's changelog to the package
     - Move django's static files in /usr/share/python-django-hyperkitty
   * d/control:
     - Add dependency on the font/js packages required by the rules change
   * wrap-and-sort
   * Add d/s/lintian-overrides to give intel on the current python3 missing
     package status.
hyperkitty (1.1.4-3) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/tests/control: Add test command 'django-admin test'.
   * d/rules: Run 'django-admin test' as build-time test.
   * d/tests/control: run django-admin with explicit python version
   * d/rules: don't run testsuite when 'nocheck' in DEB_BUILD_OPTIONS
 .
   [ Pierre-Elliott Bécue ]
   * d/watch: fix the broken link, and raise version to 4
   * d/control:
     - Bump Standards-Version to 4.1.3
     - Change Vcs links to salsa.debian.org
     - Bump debhelper version requirement to 11
     - Remove Testsuite: header as d/tests/control exists
   * d/compat: bump to 11
   * d/copyright: update years
hyperkitty (1.1.4-2) unstable; urgency=medium
 .
   * debian/copyright: Add missing copyright statement for bootstrap.
     Thanks to Chris Lamb for the hint.
   * debian/control: Bump standards-version to 4.1.2, no changes
     needed.

icmake (13.02.00-1) unstable; urgency=medium
 .
   * New upstream release contains a redesigned icmodmap program and added
     option -q to icm-spch.

kajongg (4:24.12.3-1) unstable; urgency=medium
 .
   * New upstream release
   * Team upload

kcheckers (0.8.1-8) unstable; urgency=medium
 .
   * Initiate package rename to 'qcheckers':
     "Provides:" this as a virtual package.
   * Reformat d/control with 'X-Style: black'
   * Rewrite d/copyright in machine-parsable format
   * Add d/upstream/metadata

libdatapager-perl (0.01-2.4) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Replace CDBS build with DebHelper 13

libdate-manip-perl (6.97-1) unstable; urgency=medium
 .
   * Import upstream version 6.97.
   * Update years of upstream and packaging copyright.
   * Declare compliance with Debian Policy 4.7.2.

libdnf (0.74.0-1) unstable; urgency=medium
 .
   * Update upstream source from tag 'upstream/0.74.0'
   * Refresh patch to remove fuzz from new version
   * Drop 0015-fix-segfault.patch, merged upstream

libffado (2.4.9-2) unstable; urgency=medium
 .
   * Team upload
   * Add missing B-D python3-setuptools (Closes: #1080633)

liblocale-codes-perl (3.82-1) unstable; urgency=medium
 .
   * Team upload.
   * Import upstream version 3.82.
   * Update years of upstream copyright.
   * Declare compliance with Debian Policy 4.7.2.

libsvm (3.24+ds-6.1) unstable; urgency=medium
 .
   [ Anibal Monsalve Salazar ]
   * Non-maintainer upload
 .
   [ Vladimir Petko ]
   * d/control: add java-common to Build-Depends to resolve build
     failure on platforms other than amd64.
     d/rules, d/target-source.patch: use java_compat_level variable
     provided by java-common to adjust -source/-target level to the
     minimum required by the default Java (LP: #2054242).
     Closes: #1057522

lomiri-terminal-app (2.0.4-1) unstable; urgency=medium
 .
   * New upstream release.
   * debian/patches:
     + Add 2003_ignore-autopilot.patch. Skip building autopilot tests.
       (Closes: #1080932).
   * debian/control:
     + Drop from B-D: dh-python, python3-all. Not needed.
     + In B-D, switch from pkg-config to pkgconf.
     + Bump Standards-Version: to 4.7.2. No changes needed.
   * debian/rules:
     + No need to remove autopilot tests anymore.
   * debian/copyright:
     + Update copyright attributions for debian/.

lua5.1 (5.1.5-11) unstable; urgency=medium
 .
   * Adopt package (Closes: #996252)
   * d/copyright: Convert to machine-readable format
   * Restructure packaging doc

lxhotkey (0.1.2-1) unstable; urgency=medium
 .
   * debian/watch: update.
   * New upstream version 0.1.2.
   * debian/control: build-deps on libfm-dev (>= 1.4.0).
   * debian/control: lxhotkey-dev depends on libfm-dev (>= 1.4.0).
   * debian/control: bump to Standards-version to 4.7.2, no changes needed.
   * debian/copyright: update.

lz4 (1.10.0-4) unstable; urgency=medium
 .
   * d/patches:
     - Update use-system-xxhash.patch. Fix library linking for lz4 command.
     - Add Create-softlink-for-lz4c.patch. (Closes: #1099464)
   * d/rules:
     - Enable multithreading. (Closes: #1096024)

mailman-suite (0+20240312-1) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue]
   * New upstream snapshot 0+20240312
     Closes: #1062707, #1037358, 1037956, 1055917
   * d/control:
     - Bump Standards-Version to 4.6.2
     - Refresh (Build-)Deps
   * d/copyright: updated
   * d/mailman3-web.cron.d: add a check about whether mailman3-web.service is
     running before running cronjobs (Closes: #1009045)
 .
   [ Camaleón ]
   * d/po/es.po:
     - Add initial spanish debconf translation (Closes: #988518)
mailman-suite (0+20200530-2.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * No source change upload to rebuild with debhelper 13.10.
mailman-suite (0+20200530-2) unstable; urgency=medium
 .
   * d/control: Depend on uwsgi-core, we don't need the full uwsgi package.
     Thanks to Thomas Koch for the report. (Closes: #983189)
   * d/README.Debian: Document the fact that `dpkg-reconfigure mailman3-web`
     might be required in order to get the correct API token into
     `mailman-hyperkitty.cfg`. (Closes: #983681)
   * d/mailman3-web.postinst: Replace depricated `tempfile` with `mktemp`
   * d/contrib/mailman-web: New wrapper script to configure mailman3-web
     django project. (Closes: #982935)
mailman-suite (0+20200530-1) unstable; urgency=medium
 .
   * New upstream snapshot 0+20200530
     * d/patches/0001_settings_py.patch: rebase
   * d/mailman3-web.service: Switch to `StandardError=journal`
   * d/control: Bump standards-version to 4.5.1
mailman-suite (0+20180916-10) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/control, d/patches/0001_settings_py.patch:
     * Remove dependency on sassc and tighten the dependeny on
       python3-django-hyperkitty to (>= 1.2.2-2~). Hyperkitty now compiles
       the scss files at build-time, which allows us to drop the sassc drop
       the build-time dependeny. Thanks to Christian Ehrhardt for bringing
       up this topic. (Closes: #924961)
 .
   [ Pierre-Elliott Bécue ]
   * d/control:
     - Bump Standards-Version to 4.4.1
     - Switch to debhelper-compat (version 12) instead of debian/compat
     - Use Pre-Depends: ${misc:Pre-Depends} to be properly compatible
       with --skip-systemd-native
mailman-suite (0+20180916-9) unstable; urgency=medium
 .
   * d/control, d/patches/0001_settings_py.patch:
     * Remove dependency on and reference to lessc/node-less. Mailman3
       django projects don't. (Related to #924961)
mailman-suite (0+20180916-8) unstable; urgency=critical
 .
   * d/mailman3-web.postinst:
     - Run 'systemctl daemon-reload' just if systemd is installed.
       (Closes: #930133)
   * d/control, d/patches/0001_settings_py.patch:
     - Switch back from ruby-sass to sassc. Ruby-sass became unmaintained
       and abandoned recently. Thanks to Christian Ehrhardt for bugreport
       and patch. (Closes: #924629)
mailman-suite (0+20180916-7) unstable; urgency=medium
 .
   * d/templates, d/po/*.po, d/mailman3-web.{config,postinst}:
     - Remove the whole logic to configure django site domain and name via
       debconf. The code was very error-prone and it's better to leave this
       exercise to the local admin. (Closes: #924330)
   * d/mailman3-web-postinst:
     - Fix logic to run init_django at install and update_django at upgrade.
mailman-suite (0+20180916-6) unstable; urgency=medium
 .
   * d/contrib/settings_local.py.sample:
     - Remove paintstore from INSTALLED_APPS as hyperkitty doesn't use it
       anymore starting with version 1.2.2.
   * d/control:
     - Add breaks for python3-django-hyperkitty (<< 1.2.2-1~) to reflect
       the removed paintstore dependency.
   * d/mailman3-web.service:
     - spawn 'uwsgi --plugin python3' instead of 'uwsgi_python3'
mailman-suite (0+20180916-5) unstable; urgency=medium
 .
   * d/control:
     - Replaces python3-pymysql dependency by python3-mysqldb which is the
       appropriate one for Mailman3 django projects. (Closes: #920304)
mailman-suite (0+20180916-4) unstable; urgency=medium
 .
   * d/mailman3-web.cron.d:
     - Fix indention in mailman3-web cron.d file
   * d/p/0001_settings_py.patch:
     - Set queue polling inteval for django-q  cluster to 5 seconds (defaults
       to 0.2 seconds) to decrease the database load. (Closes: #914099)
   * d/mailman3-web-mailman3-web-qcluster.service:
     - Remove superfluous systemd service file. The qcluster processes are
       already spawned automatically as children of mailman3-web.service.
mailman-suite (0+20180916-3) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/mailman3-web.mailman3-web-qcluster.service:
     - Fix path to python3 interpreter (Closes: #919154)
 .
   [ Pierre-Elliott Bécue ]
   * d/mailman3-web.postinst:
     - Avoid dpkg -s call for the upgrade_fixes, and call the fix only on
       appropriate upgrade. Will re-do it for all upgrades to -3.
   * d/mailman3-web.postrm:
     - Typo: ngnx_remove => nginx_remove. (Closes: #917548)
   * d/mailman3-web.cron.d:
     - Use /u/s/mailman3-web/manage.py instead of a call to django-admin
       and use flock to avoid piling up cron processes. (Closes: #919158)
   * d/control
     - Bump Standards-Version to 4.3.0
mailman-suite (0+20180916-2) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/mailman3-web.mailman3-web-qcluster.service:
     - Install systemd service file for django q_cluster
 .
   [ Pierre-Elliott Bécue ]
   * d/control:
     - Replace my Crans address by my Debian's one.
mailman-suite (0+20180916-1) unstable; urgency=medium
 .
   * New upstream snapshot 0+20180916
   * d/control:
     - Bump Standards-Version to 4.2.1. No changes required
     - Update Depends to python3 packages
     - Add Breaks python3-mailman-hyperkitty (<< 1.1.0-8~), since
       that version starts using python3.
   * d/control, d/NEWS:
     - Remove traces of the binary package renaming from mailman3-suite
       to mailman3-web. The former is not available anywhere anymore and
       was never part of a release anyway.
   * d/contrib/uwsgi.ini, d/mailman3-web.{config,postinst}:
     - Migrate to use python3
   * d/mailman3-web.cron.d:
     - Run cronjobs as python3
   * d/mailman3-web.{init,service}:
     - Run uwsgi_python3
   * d/mailman3-web.postinst:
     - Update python print command to python3 compatible syntax.
     - Run 'compress' management command after 'collectstatic'
     - Rebuild hyperkitty index if upgrading from Python2 packages
   * d/contrib/settings_local.py.sample
     - Add POSTORIUS_TEMPLATE_BASE_URL = 'http://localhost/mailman3/'
     - Enable COMPRESS_OFFLINE, brings performance improvements
 .
   [ Helge Kreutzmann ]
   * d/po/de.po:
     - Add initial german debconf translation (Closes: #906184)
mailman-suite (0+20170523-16) unstable; urgency=medium
 .
   [ Adriano Rafael Gomes ]
   * d/po/pt_BR.po: Brazilian Portuguese translation for debconf template
     Closes: #905871
 .
   [ Pierre-Elliott Bécue ]
   * d/control:
     - Bump Standards-Version to 4.2.0. No change required
mailman-suite (0+20170523-15) unstable; urgency=medium
 .
   [ Lev Lamberov ]
   * d/po/ru.po: Russian translation for debconf template.
     Closes: #898181
 .
   [ Rui Branco ]
   * d/po/pt.po: Portuguese translation for debconf template.
     Closes: #898540
 .
   [ Frans Spiesschaert ]
   * d/po/nl.po: Dutch translation for debconf template.
     Closes: #899029
 .
   [ Pierre-Elliott Bécue ]
   * d/mailman3-web.postinst:
     - Tweak a little the django admin call used to fetch
       Site.objects.all()[0].name, as python can't encode automagically its
       output in a subshell (as it can't with pipes). Use locale module with
       getpreferredencoding function to set a default encoding that should
       work on the current machine running the postinst script.
   * d/contrib/mailman3-web.tmpfile:
     - mailman3-web rundir moved to /run/mailman3-web.
   * d/contrib/uwsgi.ini:
     - Move the socket file into /run/mailman3-web.
   * d/contrib/mailman3-web.init:
     - Move the pid file into /run/mailman3-web.
   * d/contrib/apache.conf:
     - The socked file has been moved into /run/mailman3-web.
   * d/contrib/nginx.conf:
     - The socket file has been moved into /run/mailman3-web.
   * d/README.Debian:
     - Add some details on webserver configuration
   * d/copyright:
     - Add myself to copyright file and update copyright years
mailman-suite (0+20170523-14) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/mailman3-web.config:
     - Ignore errors on 'db_get mailman3-web/database-type'. If
       dbconfig-no-thanks is used, the debconf entry doesn't exist.
 .
   [ Pierre-Elliott Bécue ]
   * d/control:
     - Bump Standards-Version to 4.1.4. No change required.
mailman-suite (0+20170523-13) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue ]
   [ Jonas Meurer]
   * d/mailman3-web.postrm:
     - Remove all log files, also rotated ones.
   * d/README.Debian, d/TODO:
     - Package 'mailman3-core' got renamed to 'mailman3'
   * d/mailman3-web.init:
     - Fix typo in path to pidfile
     - Coding style improvements and indention fixes
   * d/mailman3-web.postinst:
     - Select user by username when deleting it from the database. This
       allows one to change the email address later.
     - Set the mail address for default admin user in ADMINS list of
       mailman-web.py to the superuser mail address from debconf.
   * d/mailman3-web.{config,postinst}, d/mailman3-web/templates:
     - Add new debconf question about Django site domain, configure it
       in postinst script.
     - Always run django-admin as user 'www-data' in maintainer scripts.
 .
   [ Pierre-Elliott Bécue]
   * Update po/fr.po
   * d/control:
     - Raise debhelper build dependency level to 11
   * d/compat: Bump to 11
mailman-suite (0+20170523-12) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * Rename binary package 'mailman3-suite' to 'mailman3-web' to avoid
     further confusion, drop binary package 'mailman3-suite'.
 .
     A bit more background:
     - The naming of our mailman3 packages caused some confusion. So we
       decided on the following:
       1. binary package 'mailman3-suite' will become 'mailman3-web' to make
          the purpose more obvious.
       2. binary and source package 'mailman3-core' will become 'mailman3'.
          This is closer to the upstream name.
       3. binary metapackage 'mailman3' will become 'mailman3-full' and moves
          to the source package 'mailman3-core'/'mailman3'.
 .
     This upload of source package 'mailman-suite' takes care of part 1.
 .
   * d/NEWS:
     - Document the renaming of the binary package name.
   * d/mailman3-web.*, d/patches/*, d/contrib/uwsgi.ini, d/rules:
     - Move logfiles to new subdirectory /var/log/mailman3/web
   * d/control:
     - Drop binary package 'mailman3', will be provided by another source
       package in future.
     - Add 'Conflicts: mailman3-suite' to mailman3-web, to prevent parallel
       installation of old and new binary package.
   * d/mailman3-web.postinst:
     - Add '-f' to ucfr for hyperkitty.conf, as we might hijack the file from
       old package mailman3-suite.
     - Explicitly run python2.7 version of django-admin
   * d/contrib/hyperkitty.cfg.sample, d/mailman3-web.{install,postinst,postrm}:
     - Remove 'hyperkitty.cfg', it belongs to python3-mailman-hyperkitty
   * d/rules:
     - Run debhelper with '--with systemd'
     - Set owner of /var/lib/mailman3/web/static/CACHE to www-data:www-data.
       (Closes: #892427)
   * d/mailman3-web.config:
     - Fix sed command in get_config_option()
     - Wrap db_input into 'db_beginblock' and 'db_endblock'
   * d/templates:
     - Enhance description for mailman3-web/superuser-password
 .
   [ Pierre-Elliott Bécue ]
   * d/mailman3-web.install:
     - Move uwsgi.ini to /etc/mailman3
   * d/contrib/nginx.conf:
     - Add nginx.conf file
   * d/mailman3-web.cron.d:
     - Fix cron jobs to call explicitly python2.7 version of django-admin.py
   * d/template:
     - Add a new debconf readme entry to display when a user choses nginx.
   * d/po/fr.po: updated translation
   * d/mailman3-web.postinxt:
     - Displays the readme if nginx is chosen
mailman-suite (0+20170523-11) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * d/control:
     - Fix alternative dependency on 'python-mysqldb'. We need the python2
       version here as the django parts of mailman3 are still python2.
   * d/README.Debian:
     - Update paragraph about 'MySQL database backend'.
   * d/mailman3-suite.config:
     - Fix dbc_dbname for SQLite database backend.
   * d/mailman3-suite.postinst:
     - Run django-admin commands as user 'www-data'. (Closes: #891703)
     - Only touch+chown logfiles if they don't exist yet.
     - Fix dbc_dbname for SQLite database backend.
   * d/mailman3-suite.postrm:
     - Remove mailman-suite logfiles at purge.
   * d/mailman3-suite.cron.d:
     - Run mailman3-suite cronjobs as user 'www-data'. The uwsgi daemon runs
       as 'www-data', so the corresponding cronjobs should do so as well.
       (Closes: #891849)
   * d/rules:
     - Set owner for whole '/var/lib/mailman3/suite/static' to www-data.
   * Move data directory from '/var/lib/mailman3/web' to
     '/var/lib/mailman3/suite' to better match package name.
 .
   [ Pierre-Elliott Bécue ]
   * d/README.Debian:
     - Fix typo
mailman-suite (0+20170523-10) unstable; urgency=high
 .
   * d/control:
     - Update Vcs-* fields to point to new repository on salsa.debian.org.
   * d/mailman3-suite.postrm:
     - Source apache2-maintscript-helper at the beginning of postrm to pass
       all arguments to it. (Closes: #891553)
     - Always remove the Apache mailman3.conf symlink, regardless of whether
       apache2-maintscript-helper was found.
mailman-suite (0+20170523-9) unstable; urgency=medium
 .
   * d/mailman3-suite.config: Fix typo, use debconf question
     'mailman3-suite/database-type' not 'mailman3-core/database-type'.
mailman-suite (0+20170523-8) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue ]
   * d/control:
     - Remove dependency on mailman3-core for mailman3-suite.
     - Update description of mailman3 metapackage.
 .
   [ Jonas Meurer ]
   * d/mailman3-suite.config:
     - Change default database backend to 'sqlite3'. Required to fix non-
       interactive installations without recommends (e.g. piuparts).
   * d/README.Debian:
     - Add a section about selection of the database backend.
   * d/control:
     - Update description of mailman3-suite package to reflect the fact
       that several database backends are supported and 'sqlite3' is the
       default.
     - Degrade recommends on postgresql|mysql to suggests now that we use
       sqlite3 as default database backend. We don't want to pull in needless
       extra database servers.
     - Set Rules-Requires-Root: binary-targets.
mailman-suite (0+20170523-7) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue ]
   * d/po/fr.po reviewed.
 .
   [ Jonas Meurer ]
   * d/mailman3-suite.prerm: Move 'dbc_go' behind the '#DEBHELPER' section.
     Database removal has to happen after service is stopped to prevent
     race conditions.
   * Add multi database backend support in maintainer scripts with dbconfig:
     * Change default database backend in the configuration skeleton to
       SQLite3. This ensures a working setup without dbconfig.
     * PostgreSQL (the upstream recommendation) stays the default at debconf
       database backend selection. This also applies for non-interactive
       installations.
     * Move SQLite3 database file to '/var/lib/mailman3/web/mailman3suite.db',
       manage it with dbconfig.
     * Unfortunately, using MySQL as backend is broken with MariaDB packages
       in Debian between 10.0.22-2 and 10.2.7-1 as they use 'utf8mb4' as
       default character set but don't have 'innodb_large_prefix' and
       row format 'dynamic' yet. See bug #886756 for further information.
       If you want to use MariaDB as database backend, you'll have to use
       MariaDB <= 10.0.22-1 or >= 10.2.7-1 for now.
   * d/control: Bump standards-version to 4.1.3, no changes required.
   * d/mailman3-suite.postinst: Change order of actions. First create config
     and log files, then run django-admin and finally (optionally) configure
     webservers.
   * d/templates: Change the webserver selection from multiselect to select,
     making 'none' the default. This fixes non-interactive installations and
     those without installed Apache2. (Closes: #884835)
   * d/mailman3-suite.postrm: Run 'db_purge' to clean up debconf database.
mailman-suite (0+20170523-6) unstable; urgency=medium
 .
   * d/mailman3-suite.init: Fix stop and reload functions by sending the right
     signals to the uwsgi daemon for stopping/killing/reloading it. Thanks
     again to Stephen Rothwell for bugreport and debugging. (Closes: #884330)
mailman-suite (0+20170523-5) unstable; urgency=medium
 .
   * d/mailman3-suite.init: Fix order of variable definitions. Thanks to
     Stephen Rothwell for the bugreport. (Closes: #884326)
mailman-suite (0+20170523-4) unstable; urgency=medium
 .
   * d/mailman3-suite.init: Fix typo in do_stop() function. Thanks to Stephen
     Rothwell for the bugreport. (Closes: #884325)
mailman-suite (0+20170523-3) unstable; urgency=medium
 .
   * d/control: fix a typo in Recommends: field. (Closes: #884316)
mailman-suite (0+20170523-2) unstable; urgency=medium
 .
   [ Pierre-Elliott Bécue ]
   * d/control: fix vcs items to solve vcswatch complaints.
   * Adds missing dependency to mailman3: python3-mailman-hyperkitty
   * Uses pipes as sed delimiters to avoid some wrongdoings with variables
     filled with base64. (Closes: #884259)
 .
   [ Jonas Meurer ]
   * d/control: bump standards-version to 4.1.2, no changes needed.
mailman-suite (0+20170523-1) unstable; urgency=medium
 .
   [ Jonas Meurer ]
   * Initial release. (Closes: #799292, #877878)
   * Package based on upstream Git commit cd1b5856 from May 23rd 2017.
 .
   [ Pierre-Elliott Bécue ]
   * French translation for debconf template.

minissdpd (1.6.0-3) unstable; urgency=medium
 .
   * Drop freebsd-glue from build-depends (Closes: #1072227).
   * Add Catalan Debconf translations, thanks to poc senderi.
   * Bump Standards-Version to 4.7.2.

miniupnpd (2.3.7-2) unstable; urgency=medium
 .
   * Add netfilter_nft/README.md as doc (Closes: #1095264).
   * Suggest users to edit config files before starting the daemon
     (Closes: #1066874, #1090753).
   * Bump Standards-Version to 4.7.2.
miniupnpd (2.3.7-1) unstable; urgency=medium
 .
   * New upstream release.
   * Increase TasksMax in systemd service file to avoid forking problems.
     (Closes: #1033012).
   * Use either iproute* tool in config script. (Closes: #1070472).
   * Bump Standards-Version to 4.7.0.
miniupnpd (2.3.4-1) unstable; urgency=medium
 .
   * New upstream release.
miniupnpd (2.3.3-1) unstable; urgency=medium
 .
   * New upstream release.
     - Fix nftables scripts (Closes: #994726).
   * Split miniupnpd_functions.sh for each backend. (Closes: #1039054).
   * Add Romanian debconf translaiton, thanks to "Remus-Gabriel Chelu"
     <remusgabriel.chelu@disroot.org> (Closes: #1032727).
miniupnpd (2.3.1-1) unstable; urgency=medium
 .
   * New upstream release.
     - Fix nftables scripts (Closes: #994726).
   * Fix systemd unit file (Closes: #1008797).
   * Update Spanish debconf translation, thanks to Camaleón <noelamac@gmail.com>
     (Closes: #1017459).
   * Bump Standards-Version to 4.6.2.
miniupnpd (2.2.3-1.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * No source change upload to rebuild with debhelper 13.10.
miniupnpd (2.2.3-1) unstable; urgency=medium
 .
   * New upstream release.
   * Enable leasefile.
   * debian/miniupnpd-startstop-helper.sh: Detect nftables without iptables
     (Closes: #992603).
   * Fix FTCBFS: Let dpkg's buildtools.mk supply cross tools (Closes: #982259).
   * Start service in background for systemd unit file (Closes: #981236).
   * Update Debconf translations, with thanks to:
     - Brazilian Portuguese, Adriano Rafael Gomes (Closes: #987229).
     - Swedish, Martin Bagge / brother (Closes: #995298).
   * Bump Standards-Version to 4.6.0.
miniupnpd (2.2.1-1) unstable; urgency=medium
 .
   * New upstream release
   * Upload to unstable
miniupnpd (2.2.0-1) experimental; urgency=medium
 .
   * New upstream release (Closes: #973511).
     - Fix iptables-init.sh for POSTROUTING (Closes: #955779).
   * Remove dep of net-tools (Closes: #961701).
   * Provide iptables and nftables-backended binaries (Closes: #961723).
   * Disable leasefile (Closes: #961877).
   * Harden systemd service (Closes: #962088).
   * Bump debhelper compat to 13.
   * Bump Standards-Version to 4.5.0.
   * Add upstream metadata.
miniupnpd (2.1-6.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   [ Thomas Goirand ]
   * Added a debian/salsa-ci.yml
 .
   [ Laurent Bigonville ]
   * Cherry-pick patches from upstream to fix FTBFS with linux > 5.0
     (Closes: #931978)
   * Update the French debconf translation (Closes: #935152)
   * Update the Italian debconf translation (Closes: #952802)
   * Remove iptables-dev from the BD, add libiptc-dev and libxtables-dev
     instead (Closes: #946150)
   * debian/miniupnpd.service: Pass -d to miniupnpd and set Type to simple.
     That way systemd will detect whether the process is exiting with a
     non-zero code or not and properly track the it.
miniupnpd (2.1-6) unstable; urgency=medium
 .
   * Add upstream patches for CVE-2019-12107 CVE-2019-12108 CVE-2019-12109
     CVE-2019-12110 CVE-2019-12111 (Closes: #930050).
miniupnpd (2.1-5) unstable; urgency=medium
 .
   * Update Danish Debconf translation, thanks to Joe Dalton (Closes: #923134).
miniupnpd (2.1-4) unstable; urgency=medium
 .
   * Fix autopkgtest.
   * Update Debconf translations, with thanks to:
     - Portuguese, Américo Monteiro (Closes: #919211).
     - German, Chris Leick (Closes: #919784).
     - Dutch, Frans Spiesschaert (Closes: #920431).
     - Vietnamese, Trần Ngọc Quân.
miniupnpd (2.1-3) unstable; urgency=medium
 .
   * Remove START_DAEMON in /etc/default/miniupnpd.
   * Update Debconf translations, with thanks to:
     - Dutch, Frans Spiesschaert (Closes: #906940).
     - German, Chris Leick (Closes: #907588).
     - French, Baptiste Jammet (Closes: #908901).
     - Portuguese, Américo Monteiro (Closes: #910456).
   * Add autopkgtest.
   * Bump Standards-Version to 4.3.0.
   * Bump debhelper compat to 12.
miniupnpd (2.1-2) unstable; urgency=medium
 .
   * Disable kfreebsd-any due to lack of iptables.
   * Remove obsolete default file in favor of debconf.
   * Add debconf option for `force_igd_desc_v1'.
   * Fix sed command bug in postinst (Closes: #901632).
   * debian/miniupnpd.config: Always prefer configs in debconf to prevent config
     loss during fresh installation.
   * debian/rules: Disable auto enabling systemd service.
   * Bump Standards-Version to 4.2.0.
miniupnpd (2.1-1) unstable; urgency=medium
 .
   * New upstream release.
   * Disable hurd-any due to lack of rt_msghdr and RTM_*.
   * Add --igd2 back, since 'force_igd_desc_v1' is now available.
   * Deprecate MiniUPnPd_EXTERNAL_INTERFACE and MiniUPnPd_LISTENING_IP in
     /etc/default/miniupnpd (Closes: #891088).
   * Add systemd service file.
   * Add Debconf translations, with thanks to:
     - Brazilian Portuguese, Adriano Rafael Gomes (Closes: #891168).
     - Dutch, Frans Spiesschaert (Closes: #899025).
   * Update patch file.
   * Bump Standards-Version to 4.1.4.
   * debian/watch: Check for PGP signature.
   * debian/watch: Only watch for release versions.
miniupnpd (2.0.20171212-2) unstable; urgency=medium
 .
   * Removed --igd2 option when building, as per recommendation from upstream.
     The igd2 protocol is basically a failure, and we should not use it, as it
     breaks igd1 clients.
miniupnpd (2.0.20171212-1) unstable; urgency=medium
 .
   [ Yangfl ]
   * New upstream release (Closes: #850411).
     - Fix V6SOCKETS_ARE_V6ONLY on Linux (Closes: #771918)
     - Default reverted to UDA 1.1 (Closes: #885960)
     - Fix CVE-2017-1000494 (Closes: #887129)
   * Enable manufacturer info configuration (Closes: #877564).
   * Allow IPv4 listening specify (Closes: #885825).
   * Bumped Standards-Version.
 .
   [ Thomas Goirand ]
   * Fixed VCS URLs to point to Salsa.
   * Ran wrap-and-sort -bast.
   * Fixed debian/gbp.conf.
miniupnpd (1.8.20140523-4.2) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Make the build reproducible. (Closes: #860266)
   * Update Vcs-{Browser,Git} to use HTTPS urls.
miniupnpd (1.8.20140523-4.1) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Backport upstream fix for the iptables version check.
     (Closes: #818413)
   * Add Dutch debconf translation by Frans Spiesschaert.
     (Closes: #766640)
miniupnpd (1.8.20140523-4) unstable; urgency=high
 .
   * Fixes multiple vulnerabilities (Closes: #772644).
miniupnpd (1.8.20140523-3) unstable; urgency=medium
 .
   * Do not install the configuration file in /etc/miniupnpd, use /usr/share
     instead, so that miniupnpd.conf isn't CONFFILE (Closes: #767646).
   * Do not use /usr/share/doc/miniupnpd/examples to get our default config
     file, which isn't policy compliant, but use /usr/share/miniupnpd.
miniupnpd (1.8.20140523-2) unstable; urgency=medium
 .
   * Removed $all from init script.
miniupnpd (1.8.20140523-1) unstable; urgency=medium
 .
   * New upstream release (Closes: #749392).
   * Standards-Version: bumped to 3.9.5.
miniupnpd (1.8.20130730-3) unstable; urgency=medium
 .
   * Now depending on iproute2 instead of iproute.
   * Added Italian debconf translaiton (Closes: #724684).
   * Added Spanish debconf translation, thanks to "Matias A. Bellone"
     <matiasbellone+debian@gmail.com> (Closes: #733065).
   * Added Swedish debconf translation, thanks to Martin Bagge
     <brother@bsnet.se> (Closes: #727185).
   * Fixed postinst that is destroying the default file (Closes: #726915).
   * Fixed wrong directive for enabling ipv6.
miniupnpd (1.8.20130730-2) unstable; urgency=low
 .
   * Added the review from the intl team (Closes: #719950).
   * Added Debconf translations, with thanks to:
     - Japanese, victory (Closes: #724310).
     - Portuguese, Traduz (Closes: #724029).
     - French, Baptiste Jammet (Closes: #723768).
     - German, Chris Leick (Closes: #723147).
     - Czech, Michal Šimůnek (Closes: #723025).
     - Russian, Yuri Kozlov (Closes: #722602).
     - Danish, Joe Dalton (Closes: #722278).
miniupnpd (1.8.20130730-1) unstable; urgency=low
 .
   * Uploading to unstable.
   * New upstream release fixing CVE-2013-2600: MiniUPnPd versions 1.8 and
     earlier are prone to an information disclosure vulnerability due to
     improper use of snprintf() while preparing SSDP responses. An attacker can
     exploit this vulnerability by sending a crafted request with a long ST
     header. If the header is long enough, the SSDP response buffer will be
     truncated by snprintf() and the subsequent sendto() call will read off the
     end of the buffer thereby disclosing the contents of adjacent memory. This
     response can reveal details of internal network topology as well as other
     activity on the target network. Fix at:
     .
     https://github.com/miniupnp/miniupnp/commit/18887cb1e49295e69c308d8bb1f2526798a77429
     .
     Correctly handle truncated snprintf() in SSDP code (Closes: #716936,
     #686537).
   * Now packaging using pristine-tar git-import-orig.
   * Added new IPv6 rules in the init script, and its configuration through
     debconf (Closes: #686287).
   * Fixed the clean process.
   * Removes now obsolete patches.
   * Build-Depends on libnfnetlink-dev.
   * Standards-Version: 3.9.4.
   * Canonical URLs for VCS feilds.
miniupnpd (1.7-4) experimental; urgency=low
 .
   * Rewrite the debconf text for the external interface, which was completely
   wrong: it was asking for the LAN interface, when in fact, what was required
   was the name of the WAN interface. Also makes other Debconf questions more
   clear, writing WAN and LAN when needed (Closes: #685652).
   * Now guessed the name of the WAN interface using route (and depends on
   net-tools as a consequence).
   * Enables IPv6 and IGDv2 support build options (Closes: #685651, #685650).
   * Added display-po-stats and display-po-stats rules target.
miniupnpd (1.7-3) experimental; urgency=low
 .
   * Added debconf support for maintaining /etc/default/miniupnpd.
miniupnpd (1.7-2) experimental; urgency=low
 .
   * Only calls sed for putting a uuid if there's no value for the uuid
   in the configuration file.
   * Removes hardening option from debian/rules.
   * Fixed postinst so that it copies miniupnpd.conf from the correct location.
   Thanks to Andreas Beckmann for reporting (Closes: #685191).
miniupnpd (1.7-1) experimental; urgency=low
 .
   * Initial release (Closes: #658434).

ns2 (2.35+dfsg-9) unstable; urgency=medium
 .
   * Make the build reproducible. Changes:
     - debian/rules: Previous override_dh_install not worked as expected. Fixed.
       Now exclude variable data inside ns2-examples package.
     - debian/source/options: New. Ignore changes in test directory.
   * debian/control:
     - Add Suggests ns2-examples to ns2 Package.
     - Descriptions rewritten.
     - Remove cmake from Build-Depends.
     - Remove Suggests ns2 from ns2-examples Package.
   * debian/docs: Rename to "debian/ns2.docs".
   * debian/rules: override_dh_compress: Exclude also "test-all-template1".
   * debian/salsa-ci.yml: Due to very long running time add
     DEB_BUILD_OPTIONS=nocheck.
   * debian/tests/*: Create autopkgtest.
   * debian/CMakeLists: Remove directory. No longer need.
   * debian/README.Debian: Remove. No longer need.

oar (2.6.0-2) unstable; urgency=medium
 .
   [ Pierre Neyron ]
   * Move pam_oar_adopt back to the oar-node package. Closes: #1099442.
   * 2.6.0 also closes: #1039291: oar-node and oar-server now have systemd
     service files.
   * 2.6.0 also closes: #1049242: incriminated oar.gpg is not packaged anymore.
 .
   [ Vincent Danjean ]
   * add breaks/replaces on oar-common (= 2.6.0-1) in case someone installed
     this version (where pam_oar_adopt was moved)
oar (2.6.0-1) unstable; urgency=medium
 .
   [ Pierre Neyron ]
   * New upstream release
   * Switch to systemd and cgroup v2 (need config update for upgrade)

ocaml-duppy (0.9.5-1) unstable; urgency=medium
 .
   * New upstream release

ocaml-qcheck (0.24-1) unstable; urgency=medium
 .
   * Team upload
   * New upstream release

ocaml-topkg (1.0.7-2) unstable; urgency=medium
 .
   * Add a noopam build profile (Closes: #1099689)

ocamlbuild (0.16.1-1) unstable; urgency=medium
 .
   * New upstream release

opentelemetry-cpp (1.19.0-1) unstable; urgency=medium
 .
   * Team upload.
   * Wrap and sort -ast
opentelemetry-cpp (1.19.0-1~exp1) experimental; urgency=medium
 .
   * Team upload.
   * New upstream version 1.19.0
   * Remove no longer needed d/patches/armel-yield.patch
   * Set the Science Team as Maintainer and the Freexian Packaging Team as
     Uploader.
   * Add patch to build googletest from sources
   * Remove debian/patches/disable-tests.patch
   * Update d/rules to link googletest to the source available in debian
   * Don't run test on multiple CPU cores
   * Update build-dependencies: we want googletest source code and versioned
     opentelemetry-proto

opentelemetry-proto (1.5.0-1) unstable; urgency=medium
 .
   * Team upload.
   * Wrap and sort -ast
   * Enable wrap-and-sort job in Salsa CI
   * Add d/gbp.conf to reflect default debian and upstream branches
opentelemetry-proto (1.5.0-1~exp1) experimental; urgency=medium
 .
   * Team upload.
   * New upstream version 1.5.0
   * Set Freexian Packaging Team as Uploader instead of myself.
   * Reflect pprofextended.proto to profiles.proto changes in d/changelog
   * Add d/tests/autopkgtest-pkg-python.conf and correct the module name

pachi (1:1.0-15) unstable; urgency=low
 .
   * Fixed scores.dat handling.
pachi (1:1.0-14) unstable; urgency=low
 .
   * Switched to debhelper, recompiled against gcc-14, closes: #1075354.
   * Added watch file.
   * Updated standards version.
pachi (1:1.0-11) unstable; urgency=low
 .
   * rebuild against current sid
pachi (1:1.0-10) unstable; urgency=low
 .
   * Fix FTCBFS: Let dpkg's buildtools.mk supply tools, closes: #958131.
     Thanks to Helmut Grohne.
   * Added desktop file, closes: #737995.
pachi (1:1.0-9) unstable; urgency=low
 .
   * Recompiled against sid.
   * Updated standards version: added strip --strip-unneeded,
     sorted DEBIAN/md5sums, fixed postinst/postrm scripts.
pachi (1:1.0-7) unstable; urgency=low
 .
   * Cleaned up Debian patches, closes: #643236.
   * Updated build script.
   * Updated standards version.
pachi (1:1.0-6) unstable; urgency=low

  * (Partly) fixed dependencies.
  * Updated package to source format 3.0 (quilt).
  * Updated standards version.

pachi (1:1.0-5) unstable; urgency=low

  * Updated menu section.
  * Removed linda overrides file.

pachi (1:1.0-4) unstable; urgency=low

  * Fixed timestamps.
  * Fixed control file, closes: #432988.
  * Updated debian/rules.
  * Updated standards version.

pachi (1:1.0-2) unstable; urgency=low

  * Make pachi-data depends on pachi, closes: #295128.
  * Fixed POSIX compliance of debian/rules.

pachi (1:1.0-1) unstable; urgency=low

  * New upstream release.
  * Minor fixes in debian/rules and debian/menu.

pachi (20031005-2) unstable; urgency=low

  * Splitted into binary and data package, closes: #233427.
  * debian/rules cleanup.

pachi (20031005-1) unstable; urgency=low

  * New upstream release.
  * Removed versioned build dependency and README file.
  * Updated package description and standards version.

pachi (20030420-1) unstable; urgency=low

  * New upstream release, closes: #183610.

pachi (20030224-2) unstable; urgency=low

  * Fixed backspace handling when reading the player's name.
  * Recompilation against new sdl-mixer1.2.
  * Tightened build-dependency.
  * Added Linda overrides file.
  * Removed CFLAGS from debian/rules.
  * Updated standards version.

pachi (20030224-1) unstable; urgency=low

  * Initial release, closes: #177611.


pari (2.17.2-1) unstable; urgency=medium
 .
   * New upstream release.
   * debian/control:
     - Bump Standards-Version to 4.7.2.
     - Homepage: use https.
   * debian/rules:
     - disable test-export to work around bug #1099624

pci.ids (0.0~2025.03.09-1) unstable; urgency=medium
 .
   * New upstream release.
   * Switch to Standards-Version 4.7.2 (no changes needed).

python-array-api-compat (1.11.1-1) unstable; urgency=medium
 .
   * New upstream version 1.11.1
   * d/patches: refresh and disable more unsupported tests
   * d/rules: do not run test_jax.py in dh_auto_test
   * d/control: bump std-ver to 4.7.2, add python3-setuptools in B-D

python-gios (6.0.0-1) unstable; urgency=medium
 .
   * New upstream release.
   * Add missing build dependency for pybuild-plugin-pyproject.
   * Add dependency on python3-dacite.
   * Update Standards-Version.
   * Update copyright year.
   * Simplify debian/rules.
   * Simplify debian/watch.

python-scikit-cuda (0.5.1-5) unstable; urgency=medium
 .
   * Add missing dependency to autopkgtest.
python-scikit-cuda (0.5.1-4) unstable; urgency=medium
 .
   * Add missing Build-Depends.
python-scikit-cuda (0.5.1-3) unstable; urgency=medium
 .
   * Source-only upload for migration to testing.
python-scikit-cuda (0.5.1-2) unstable; urgency=medium
 .
   * Fix d/watch.
   * Fix d/copyright.
 .
 python-scikit-cuda (0.5.1-1) unstable; urgency=low
 .
   * Initial packaging (Closes: #1088048).

python-technove (2.0.0-1) unstable; urgency=medium
 .
   * New upstream release.

python-webrtc-models (0.3.0-2) unstable; urgency=medium
 .
   * Update Standards-Version.
python-webrtc-models (0.3.0-1) unstable; urgency=medium
 .
   * Initial release. (Closes: #1098797)

qpdf (12.0.0-2) unstable; urgency=medium
 .
   * Upload to unstable.
qpdf (12.0.0-1) experimental; urgency=medium
 .
   * New upstream release.
   * Bump soname to 30. Remove t64 transition material since libqpdf30 was
     introduced after the t64 transition.
   * Standards version updated to 4.7.2; no changes needed.

r-cran-bit (4.6.0+dfsg-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version
   * Standards-Version: 4.7.2 (routine-update)
   * Fix debian/copyright.

r-cran-cftime (1.5.1-1) unstable; urgency=medium
 .
   * New upstream version
   * Standards-Version: 4.7.2 (routine-update)
   * Trim trailing whitespace.
   * Set upstream metadata fields: Archive, Bug-Database, Bug-Submit, Repository,
     Repository-Browse.
r-cran-cftime (1.5.0-2) unstable; urgency=medium
 .
   * Add missing copyright and license statements

r-cran-ncmeta (0.4.0-1) unstable; urgency=medium
 .
   * Team upload.
   * New upstream version
   * Standards-Version: 4.7.0 (routine-update)
   * Build-depend on r-cran-cftime (in NEW).

rails (2:7.2.2.1+dfsg-2) unstable; urgency=medium
 .
   * Team upload
   * Drop (build) dependency on ruby-webpacker
     (replaced by ruby-{js,css}bundling-rails)
   * Bump Standards-Version to 4.7.2 (no changes needed)
rails (2:7.2.2.1+dfsg-1) unstable; urgency=medium
 .
   [ Utkarsh Gupta ]
   * Reupload to unstable.
     - Fixes CVE-2023-38037, CVE-2023-28362, CVE-2024-26144, CVE-2024-28103,
       CVE-2024-47889, CVE-2024-47888, CVE-2024-47887, CVE-2024-41128.
     - Closes: #1051057, #1051058, #1065119, #1072705, #1085376.
   * No-change rebuild for unstable.
 .
   [ Antonio Terceiro ]
   * autopkgtest: newapp: adapt to new rails version.
rails (2:7.2.2.1+dfsg-1~exp6) experimental; urgency=medium
 .
   * Team upload
   * Add ruby-useragent (>= 0.16~) as ruby-actionpack dependency
rails (2:7.2.2.1+dfsg-1~exp4) experimental; urgency=medium
 .
   * Add ruby-zeitwork to railties deps
rails (2:7.2.2.1+dfsg-1~exp3) experimental; urgency=medium
 .
   * Add ruby-rack-session to ruby-actionpack deps
rails (2:7.2.2.1+dfsg-1~exp2) experimental; urgency=medium
 .
   * Fix ruby-rack version
rails (2:7.2.2.1+dfsg-1~exp1) experimental; urgency=medium
 .
   * New upstream version 7.2.2.1+dfsg
   * Build-depend on ruby-rack-session >= 1.0.1
   * Build-depend on ruby-sprockets >= 4 for rack3 support
   * Build-depend on ruby-useragent
   * Build-depend on ruby-rackup >= 1
   * allow ruby-rack v3 as build-dep
   * Drop build-dependency on ruby-blade and ruby-coffeescript
   * (build)-depend on ruby-rails-html-sanitizer >= 1.6
   * Relax dependency on timeout gem
   * Relax version dependency on irb
   * Restriction on ruby-nokogiri minimal version
   * Don't install RUNNING_UJS_TESTS.rdoc RDOC_MAIN.rdoc as a doc, removed upstream

ruby-acts-as-taggable-on (11.0.0-2) unstable; urgency=medium
 .
   * Re-upload to unstable. (Closes: #1095878)
ruby-acts-as-taggable-on (11.0.0-1) experimental; urgency=medium
 .
   * Team upload
   * New upstream version 11.0.0

ruby-awesome-nested-set (3.8.0-1) unstable; urgency=medium
 .
   * New upstream version 3.8.0
   * Add myself as an uploader instead.
     - Thanks for your work Antonio & Ajayi.

ruby-has-scope (0.8.2-1) unstable; urgency=medium
 .
   * New upstream version 0.8.2. (Closes: #1094525, #1095883)
   * Point d/watch to GitHub.
   * Drop mocha_minitest patch - adapted upstream.
   * Add patch to drop bundler/setup in tests.
   * Bump rails to 7.2.
   * Add myself as an uploader instead.

ruby-invisible-captcha (2.3.0-3) unstable; urgency=medium
 .
   * Re-upload to unstable. (Closes: #1095884)
ruby-invisible-captcha (2.3.0-2) experimental; urgency=medium
 .
   * Team upload.
   * Run tests with rails 7

ruby-rack-accept (0.4.5-4) unstable; urgency=medium
 .
   * Team upload
 .
   [ Cédric Boutillier ]
   * Bump debhelper compatibility level to 9
   * Use https:// in Vcs-* fields
   * Bump Standards-Version to 3.9.7 (no changes needed)
   * Run wrap-and-sort on packaging files
 .
   [ Utkarsh Gupta ]
   * Add salsa-ci.yml
 .
   [ Debian Janitor ]
   * Use secure copyright file specification URI.
   * Bump debhelper from old 9 to 12.
   * Set debhelper-compat version in Build-Depends.
   * Set upstream metadata fields: Bug-Database, Bug-Submit, Repository,
     Repository-Browse.
   * Update Vcs-* headers from URL redirect.
   * Use canonical URL in Vcs-Git.
   * Remove constraints unnecessary since stretch:
     + Build-Depends: Drop versioned constraint on ruby-rack.
     + ruby-rack-accept: Drop versioned constraint on ruby-rack in Depends.
   * Update watch file format version to 4.
   * Bump debhelper from old 12 to 13.
 .
   [ Antonio Terceiro ]
   * Rack::Accept::Response: drop usage of deprecated method.
     This fixes this package to work with ruby-rack 3.1

ruby-rails-propshaft (1.1.0-3) unstable; urgency=medium
 .
   * Re-upload to unstable.
ruby-rails-propshaft (1.1.0-2) experimental; urgency=medium
 .
   * Rename debian/ruby-propshaft.docs to debian/docs.
ruby-rails-propshaft (1.1.0-1) experimental; urgency=medium
 .
   * Initial release (Closes: #1095198)

ruby-rspec-rails (7.1.1-2) unstable; urgency=medium
 .
   * Add patch to skip a random test failure.
   * Refresh d/patches.
ruby-rspec-rails (7.1.1-1) unstable; urgency=medium
 .
   * New upstream version 7.1.1. (Closes: #1095886)
   * Refresh control and watch files with dh_make_ruby -w.
   * Unfuzzy remove-ammeter-require.patch and remove-warnings.diff.
   * Continue to build-depend on ruby-warning.
   * build-depend on ruby-rails.
   * Build-depend on ruby-capybara.
   * Skip test for take_screenshot using Selenium for now.

ruby-with-advisory-lock (5.1.0-3) unstable; urgency=medium
 .
   [ Soren Stoutner ]
   * debian/control:  Bump standards version to 4.7.2, no changes needed.
 .
   [ Antonio Terceiro ]
   * Add patch to fix tests with rails 7. (Closes: #1095888)

rust-block-buffer (0.10.4-1) unstable; urgency=medium
 .
   * Team upload.
   * Package block-buffer 0.10.4 from crates.io using debcargo 2.7.8

rust-tracing-durations-export (0.3.0-1) unstable; urgency=medium
 .
   * Package tracing-durations-export 0.3.0 from crates.io using debcargo 2.7.6

sqlite3 (3.46.1-2) unstable; urgency=medium
 .
   * Upload to unstable.
sqlite3 (3.46.1-2~exp) experimental; urgency=medium
 .
   [ Mike Gabriel <sunweaver@debian.org> ]
   * debian/:
     + Build ICU extension as dynamically loadable library and ship it in
       bin:pkg libsqlite3-ext-icu (closes: #758985).
 .
   [ Laszlo Boszormenyi (GCS) ]
   * Ship CSV extension in libsqlite3-ext-csv (closes: #900277).

svgtune (0.3.1-1.2) unstable; urgency=medium
 .
   * Non-maintainer upload.
   * Replace CDBS build with DebHelper 13
   * Add d/watch file
   * Import Debian packaging on Salsa

sword-comm-scofield (2.1-2) unstable; urgency=medium
 .
   * Team upload
   * Prevent modifying source files (Closes: #1047847)

sword-dict-strongs-greek (3.0-4) unstable; urgency=medium
 .
   * Team upload.
   * Prevent modifying source files. (Closes: #1045258)

tdiary (5.3.0-2) unstable; urgency=medium
 .
   * Team upload.
   * Backport upstream patches to support rack 3
   * Declare compliance with Debian Policy 4.7.2

u-boot (2025.01-2) unstable; urgency=medium
 .
   * debian/copyright: Clarify some ambiguous license declarations.
   * debian/targets.mk: u-boot-omap: Drop omap3_beagle and omap4_beagle
     targets, removed upstream.
   * debian/control: Update to Standards-Version 4.7.2.
u-boot (2025.01-1) unstable; urgency=medium
 .
   * New upstream version.
 .
   [ Vagrant Cascadian ]
   * debian/copyright: Remove last Files-Excluded file, no longer present
     upstream.
   * debian/watch: Drop +dfsg suffix.
   * debian/changelog: Drop +dfsg suffix.
   * debian/rules: Adjust setting DEBIAN_REVISION for removed +dfsg suffix.
   * debian/patches: Refresh patches for 2024.10, drop patches no longer
     necessary.
   * debian/patches: Refresh qemu/efi-secure-boot.patch for v2025.01-rc6.
 .
   [ Martyn Welch ]
   * debian/targets.mk: Re-enable sitara
   * sitara: Don't attempt to build final firmware images
   * sitara: Update dtb location
   * sitara: Package keys required for signing boot firmware
 .
   [ Diederik de Haas ]
   * debian/copyright: Sort license stanzas
   * debian/copyright: Add copyright data for new files in 2024.04
   * debian/patches: Drop patches applied upstream
   * debian/patches: rockchip: Drop inno-usb2 patch (Closes: #1024851)
 .
   [ Vagrant Cascadian ]
   * debian/copyright: Update for 2025.01. Thanks to Frank Pursel and
     Diederik de Haas for all the help!

uutf (1.0.3-3) unstable; urgency=medium
 .
   * Fix FTBFS on bytecode architectures
uutf (1.0.3-2) unstable; urgency=medium
 .
   * Add a noopam build profile (Closes: #1099733)

xscavenger (1.4.5-10) unstable; urgency=medium
 .
   * Rewrite d/copyright in machine-readable format



REMOVED: ruby-webpacker 5.4.4-3
REMOVED: falcosecurity-libs 0.18.1-2